A
alcanadakid
Member
Our pool constantly has a high PH. We mix in lots of PH Minus, but much more than others we know.
Anyone got any ideas what could be cause?
Anyone got any ideas what could be cause?
Provide or get advice on everything Puerto Pollensa, ask questions, gain confirmation or just become apart of a friendly, like minded community.
Hi alcanadakid
What pH have you got?
Adios
Dave
Don't know what the ph of the makeup water is. Is it very alkaline. Is there a high makeup. Is concrete in good condition. Is the concrete damaged . Is the coating intact.
Is the strength of your ph minus correct and made up properly.
Adios
Dave
Alcanadakid
It could be that the concrete in your sump is corroding.Can you look at it to tell its condition? It may leech out calcium compounds causing high alkalinity.
Also if your make up rate is high as JMD says this could be causing it. I assume your water is metered. Do you know if you are using much more recently? .
I don't know what type of pH paper you are using but please check that red is alkaline. In normal litmus paper red is acid. Check with diluted vinegar.
You could try a quick test on your tap water and if possible try to tell if the pH of the sump water is higher than tap and pool water.
Another longshot - could any water be running into the pool from anywhere else from grass watering etc.
Adios
Dave
Stevo
Interesting about your father inventing the DPD method. I have used this many times and it is a great system.